|
G-2140 / S-2140 ALLOY BOLT
TYPE ANCHOR SHACKLES
G-2140 meets the performance requirements
of Federal Specification RR-C-271D, Type IVA, Grade B, Class 3, except for
those provisions required of the contractor. For additional information, see page
361. |
- Quenched and Tempered.
- Alloy bows, Alloy bolts.
- Forged Alloy Steel 30 thru
175 metric tons. Cast Alloy Steel 200 thru 400 metric tons.
- Working Load Limit is permanently
shown on every shackle.
- All sizes are individually
proof tested to 2.0 times the Working Load Limit.
- Pins are galvanized and painted
red.
- Certification must be requested
at time of order.
- Shackles are Quenched and
Tempered and can meet DNV impact requirements of 42 joules at -20 C.
- Crosby products meet or exceed
all the requirements of ASME B30.26 including identifacation, ductility, design
factor, proof load and temperature requirements. Importantly, Crosby products meet
other critical performance requirements including fatigue life, impact properties
and material traceability, not addressed by ASME B30.26.
- Shackles 200 metric tons and
larger are provided as follows.
- Serialized Pin and Bow
- Material Certification (Chemical)
- Magnetic Particle Inspected
|
|
Nominal Shackle Size
(in.) |
Working Load Limit *
(t) |
Stock No. |
Weight Each (lbs.) |
Dimensions
(in.) |
Tolerance |
G-2140
Galv. |
S-2140
S.C. |
A |
B |
C |
D |
E |
F |
G |
H |
J |
K |
L |
A |
E |
|
1-1/2 |
30 |
1021110 |
1021129 |
20.8 |
2.38 |
3.63 |
1.62 |
1.66 |
5.75 |
1.39 |
6.88 |
7.73 |
10.00 |
3.88 |
1.53 |
.13 |
.25 |
|
1-3/4 |
40 |
1021138 |
1021147 |
33.9 |
2.88 |
4.19 |
2.25 |
2.04 |
7.00 |
1.75 |
8.80 |
9.33 |
12.34 |
5.00 |
1.84 |
.13 |
.25 |
|
2 |
55 |
1021156 |
1021165 |
52.0 |
3.25 |
4.81 |
2.40 |
2.30 |
7.75 |
2.00 |
10.15 |
10.41 |
13.68 |
5.75 |
2.08 |
.13 |
.25 |
|
2-1/2 |
85 |
1021174 |
1021183 |
96.0 |
4.12 |
5.81 |
3.12 |
2.71 |
10.50 |
2.62 |
12.75 |
13.58 |
17.70 |
7.25 |
2.71 |
.25 |
.25 |
|
3 |
120 |
1021192 |
- |
178.0 |
5.00 |
6.50 |
3.62 |
3.30 |
13.00 |
3.00 |
14.62 |
15.13 |
21.50 |
7.88 |
3.12 |
.25 |
.25 |
|
3-1/2 |
150 |
1021218 |
- |
265.0 |
5.25 |
8.00 |
4.38 |
3.76 |
14.63 |
3.75 |
17.02 |
19.00 |
24.88 |
9.00 |
3.62 |
.25 |
.25 |
|
4 |
175 |
1021236 |
- |
338.0 |
5.50 |
9.00 |
4.56 |
4.25 |
14.50 |
4.00 |
18.00 |
19.75 |
25.68 |
10.00 |
4.00 |
.25 |
.25 |
|
4-3/4 ** |
200 |
1021414 |
- |
450.0 |
7.25 |
10.50 |
6.00 |
4.75 |
15.69 |
3.75 |
21.00 |
20.59 |
29.25 |
11.00 |
4.50 |
.25 |
.25 |
|
5 ** |
250 |
1021432 |
- |
600.0 |
8.50 |
12.00 |
6.50 |
5.00 |
20.06 |
3.88 |
24.50 |
22.06 |
35.00 |
13.00 |
4.50 |
.25 |
.25 |
|
6 ** |
300 |
1021450 |
- |
775.0 |
8.38 |
12.00 |
6.75 |
6.00 |
19.56 |
6.43 |
25.00 |
24.44 |
35.25 |
13.00 |
5.00 |
.25 |
.25 |
|
7 ** |
400 |
1021478 |
- |
1102.0 |
8.25 |
14.00 |
7.25 |
7.00 |
22.56 |
6.50 |
26.00 |
28.06 |
40.25 |
13.00 |
6.00 |
.25 |
.25 |
* Note: Maximum
Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Load is 4 times
the Working Load Limit on 200 thru 400 metric Tons. For sizes 30 thru
175 metric Tons, Minimum Ultimate Load is 5.4 times the Working Load Limit.
** Cast Alloy Steel.
Furnished with Round Head Bolts with welded handle.
For Working Load Limit reduction due to side loading applications,
see page 68.
|