G-2160
S-2160
"WIDE BODY"
SHACKLES

Patented
  • All sizes Quenched and Tempered for maximum strength..
  • Forged alloy steel from 7 through 300 metric tons.
  • Cast alloy steel from 400 through 1550 metric tons.
  • Sizes 300 tons and smaller are proof tested to 2 times the Working Load Limit.
  • Sizes 400 tons and larger are tested to 1.33 times the Working Load Limit.
  • All ratings are in metric tons, embossed on side of bow.
  • G-2160 bows are furnished Dimetcoted and pins are Dimetcoted, then painted red.
  • S-2160 bows and pins are painted red.
  • 30-1550t are RFID equipped.
  • Greatly improves wearability of wire rope slings.
  • Can be used to connect HIGH STRENGTH Synthetic Web Slings, HIGH STRENGTH Synthetic Round Slings or Wire Rope Slings.
  • Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble.
  • Increases usable sling strength minimum of 15%.
  • Pin is non-rotating, with weld -on handles for easier use (300t and larger).
  • All 2160 shackles are individually proof tested and magnetic particle inspected. Crosby certification available at time of order.
  • Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
  • Shackles requiring ABS, Lloyds and other certifications are available upon special request and must be specified at time of order.
  • Shackles 30t and larger meet DNV approval and are produced in accordance with certified lifting appliance requirements.
  • Serialization / Identification
  • Material Testing (Physical / Chemical / Charpy)
  • Proof Testing



7 through 300
metric tons
400 through 1550
metric tons
Working Load
Limit
(t)*
G-2160
Stock
No.
S-2160
Stock
No.
Weight
Each
(lbs.)
Dimensions
(in.)
A
B
+/ -.25
C
D
+/ -.02
E
G
H
J
K
P
R
†7
1021256
1021548
4
4.14
1.25
0.69
0.88
1.82
1.25
3.56
1.60
1.25
4.10
5.87
†12.5
1021265
1021557
10
5.38
1.69
0.92
1.13
2.38
1.37
4.63
2.13
1.63
5.51
7.63
†18
1021274
1021566
15
6.69
2.03
1.16
1.38
2.69
1.50
5.81
2.50
2.00
6.76
9.38
†30
1021283
1021575
27
7.69
2.37
1.38
1.63
3.50
1.75
6.94
3.13
2.50
8.50
11.38
†40
1021285
1021584
46
9.28
2.88
1.69
2.00
4.00
2.31
8.06
3.75
3.00
10.62
13.62
†55
1021287
1021593
74
10.36
3.25
2.00
2.25
4.63
2.63
9.36
4.50
3.50
12.26
15.63
†75
1021290
-
100
14.37
4.13
2.12
2.75
5.00
2.50
11.53
4.75
3.64
12.28
18.41
†125
1021307
-
178
16.51
5.12
2.56
3.15
5.71
3.15
14.36
5.91
4.33
14.96
22.65
†200
1021316
-
500
20.67
5.91
3.35
4.12
7.28
4.33
18.90
8.07
5.41
19.49
29.82
†300
1021325
-
643
24.20
7.38
4.00
5.25
9.25
5.38
23.63
10.38
6.31
23.38
37.26
††400
1021334
-
1165
30.27
8.66
5.16
6.30
11.81
6.30
22.64
12.60
7.28
27.17
38.78
††500
1021343
-
1462
33.35
9.84
5.73
7.09
13.39
6.69
24.81
13.39
8.86
31.10
42.72
††600
1021352
-
2155
36.02
10.83
6.23
7.87
15.50
7.28
27.56
14.57
9.74
34.06
47.24
††700
1021361
-
2585
38.91
11.81
6.59
8.46
14.80
7.87
28.94
15.75
10.63
37.01
50.18
††800
1021254
-
3075
41.66
12.80
7.30
9.06
16.54
8.27
29.53
16.54
10.92
38.39
52.09
††900
1021389
-
3720
43.73
13.78
7.78
9.84
16.93
8.66
29.82
17.32
11.52
40.35
54.04
††1000
1021370
-
4130
45.98
14.96
8.33
10.63
17.72
9.06
29.92
18.11
12.11
42.32
55.31
††50
1021272
-
6310
49.86
16.93
9.15
11.81
21.00
10.43
36.61
20.87
12.70
46.26
65.35
††1550
1021281
-
8155
54.89
18.31
10.58
12.60
23.82
15.92
42.32
22.82
13.29
49.41
73.43
*†Forged Alloy Steel.  Proof Load is 2 times the Working Load Limit.  Ultimate Load is 5 times the Working Load Limit.
††Cast Alloy Steel.  Proof Load is 1.33 times the Working Load Limit.  Ultimate Load is 4.5 times the Working Load Limit.