|
S-360
|
S-360 Firefighter Anchor
Hook
This hook is intended to be used as an anchor in an engineered
system for firefighter escape applications.
- The hook is intended to be a component of a system
specifically designed by a qualified person for firefighter
escape.
- The user is to be trained in the proper usage of the
system.
- After any use, the hook must be inspected. Any evidence
of paint discoloration due to heat damage, hook deformation, or
alteration is cause for removal from service and replacement.
- Forged Alloy Steel - Quenched and Tempered.
- This hook was designed in conjunction with members of
FDNY as a component in their fire escape system.
- Each product has a Product Identification Code (PIC)
for material traceability, along with the name Crosby forged into
it.
- Design Factor of 4.4 to 1 (per NFPA 1983).
- The bowl (saddle) of the hook is designed to easily fit
around pipes or framework, and the machined tip is rated for full
Working Load Limit.
- Meets the requirements of NFPA 1983 - Standard on Fire
Service Life Safety Rope and System Components, for Light-use Auxillary
Equipment.
|
