FORGED SWIVELS
  • Hot dip Galvanized
  • Quenched & Tempered 
  • Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements.  Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. 
401, 402, and 403 swivels are positioning devices and are not intended to rotate under load.  For load swivels see page 111-115.  Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c)2000.

 

G-401
Chain Swivels
  • Meets the performance requirements of Federal Specification RR-C-271D, Type VII, Class 1, except for those provisions required of the contractor.  For more information, see page 361.
Size
( in.)		 G-401
Stock No.
Galv.		 Working
Load
Limit *
(lbs.)		 Weight
Each
(lbs.)		 Dimensions
 A B C D E G J M R U V
1/4 1016233 850 .13 1.25 .69 .75 .62 1.12 .25 .69 .31 2.25 1.69 1.25
5/16 1016251 1250 .25 1.63 .81 1.00 .75 1.38 .31 .81 .38 2.72 2.06 1.47
3/8 1016279 2500 .54 2.00 .94 1.25 1.00 1.75 .38 1.00 .50 3.44 2.50 1.88
1/2 1016297 3600 1.12 2.50 1.31 1.50 1.25 2.25 .50 1.31 .63 4.25 3.19 2.44
5/8 1016313 5200 2.09 3.00 1.56 1.75 1.50 2.75 .62 1.50 .75 5.13 3.88 2.94
3/4 1016331 7200 3.09 3.50 1.75 2.00 1.75 3.25 .75 1.88 .88 5.78 4.94 3.46
* Ultimate Load is 5 times the Working Load Limit.

G-402
Regular Swivels

  • Meets the performance requirements of Federal Specification RR-C-271D, Type VII, Class 2, except for those provisions required of the contractor. For more information, see page 361.  
    • Size
    (in.)    		 G-402
    Stock No.
    Galv.    		 Working
    Load
    Limit*
    (lbs.)    		 Weight
    Each
    (lbs.)    		 Dimensions
    (in.)
    A  B C D J M R S
    1/4   1016019  850 .21  1.25 .69 .75 1.06 .69 .31 2.94 1.69
    5/16 1016037 1250 .39 1.63 .81 1.00 1.25 .81 .38 3.56 2.06
    3/8  1016055 2250 .71 2.00 .94 1.25 1.50 1.00 .50 4.31 2.50
    1/2 1016073 3600 1.32 2.50 1.31 1.50 2.00 1.31 .63 5.44 3.19
    5/8 1016091 5200 2.49 3.00 1.56 1.75 2.38 1.50 .75 6.56 3.88
    3/4 1016117 7200 4.02 3.50 1.75 2.00 2.63 1.88 .88 7.19 4.31
    7/8 1016135 10000 6.25 4.00 2.06 2.25 3.06 2.13 1.00 8.38 5.00
    1 1016153 12500 8.95 4.50 2.31 2.50 3.50 2.38 1.13 9.63 5.75
    1-1/4 1016199 18000 16.37 5.63 2.69 3.13 3.69 3.00 1.50 11.44 6.75
    1-1/2 1016215 45200 45.79 7.00 3.88 4.00 4.19 4.00 2.25 17.13 10.00
    * Ultimate Load is 5 times the Working Load Limit.
       

    G-403
    Regular Swivels

  • Meets the performance requirements of Federal Specification RR-C-271D, Type VII, Class 3, except for those provisions required of the contractor.  For more information, see page 361.
  • U.S. Patent 5,381,650 and other equivalents.
    		•  
    Size
    (in.)    		 G-403
    Stock No.
    Galv.    		 Working
    Load
    Limit*
    (lbs.)    		 Weight
    Each
    (lbs.)    		 Dimensions
    (in.)
    A  B C G J K L M N  P R U V
    1/4   1016395  850 .21 1.25 .69 .75 .69 .69 .47 1.03 .31 .88 .25 2.63 1.69 1.69
    5/16 1016411 1250 .34 1.63 .81 1.00 .81 .81 .50 1.13 .38 .88 .31 2.94 2.06 1.81
    3/8  1016439 2250 .66 2.00 .94 1.25 1.00 1.00 .63 1.41 .50 1.06 .38 3.63 2.50 2.25
    1/2 1016457 3600 1.34 2.50 1.31 1.50 1.31 1.31 .75 1.75 .63 1.31 .50 4.50 3.19 2.88
    5/8 1016475 5200 2.48 3.00 1.56 1.75 1.63 1.50 .94 2.06 .75 1.50 .63 5.31 3.88 3.44
    3/4 1016493 7200 3.88 3.50 1.75 2.00 1.88 1.88 1.13 2.53 .88 1.75 .75 6.06 4.31 4.00
    7/8 1016518 10000 5.87 4.00 2.06 2.25 2.13 2.13 1.19 2.75 1.00 2.06 .88 7.00 5.00 4.53
    1 1016536 12500 9.84 4.50 2.31 2.50 2.63 2.38 1.75 3.72 1.13 2.81 1.13 8.56 5.75 5.94
    1-1/4 1016572 18000 15.75 5.69 2.69 3.13 3.13 3.00 2.06 4.31 1.63 2.81 1.38 9.75 7.06 6.38
    1-1/2 1016590 45200 54.75 7.00 4.19 4.00 5.63 4.00 2.88 6.00 2.25 4.44 2.25 14.74 10.00 10.84
    *     Ultimate Load is 5 times the Working Load Limit.    		  

     

    l>