SEE APPLICATION AND WARNING INFORMATION
Para Español: www.thecrosbygroup.com On Pages 50-51
  

New Product
PowerPoint Presentation
  • Wide range of sizes available
  • Working Load Limit: 0.4-14 tons
    		•
  • Wire Rope sizes: 3/16" thru 1-1/8"
    		•
  • Swage shank hook terminations have an efficiency rating of 95% based on the catalog strength of wire rope.
  • Quenched and Tempered. Heat treat process allows for ease of swaging.
  • Forged Carbon Steel
  • Design Factor of 5 to 1.
  • Black Oxide finish on body (Shank is uncoated).
  • Utilizes standard Crosby 319N shank hooks with interlocking hook tip. Each hook has a pre-drilled cam which can be equipped with a latch.
  • Utilizes standard National Swage swaging dies.
  • All hooks incorporate Crosby's patented QUIC-CHECK markings (Angle Indicators and Throat Deformation Indicators).
    See page 88 for detailed information.
 
 
For use with 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC Wire rope.
Before using any Crosby fitting with any other type lay, construction or grade of wire rope, it is recommended that the termination be destructive tested and documented to prove the adequacy of the assembly to be manufactured. Refer to swage socket or swage button instructions in the National Swage Swaging Products and Procedures Brochure for proper swaging techniques.

S-319SWG
Shank Hooks for Swaging

Wire Rope Size (in.)

Hook
ID
Code

 Working
Load Limit
(Tons)* 		S-319SWG
Stock No.		 Weight
Each
(lbs.) 		Required
Swaging Die		 Maximum
After Swage
Diameter
(in.)
Die
Description 		Die
Stock No.
 3/16 DC  0.4 1053002 .55 1/8" Button 1191621 .40
1/4 FC 0.7 1053011 .77 1/4" Socket 1192845 .46
5/16 GC 1.1 1053020 1.26 1/4" Button 1191621 .58
5/16 HC 1.1 1053039 1.83 3/8" Socket 1192863 .71
3/8 HC 1.6 1053048 1.80 3/8" Socket 1192863 .71
7/16 IC 2.1 1053057 3.63 1/2" Socket 1192881 .91
1/2 IC 2.8 1053066 3.58 1/2" Socket 1192881 .91
9/16 JC 3.5 1053075 7.37 5/8" Socket 1192907 1.16
5/8 JC 4.3 1053084 7.30 5/8" Socket 1192907 1.16
3/4 KC 6.2 1053093 12.73 3/4" Socket 1192925 1.42
7/8 LC 8.3 1053100 17.58 7/8" Socket 1192949 1.55
1 NC 11.0 1053119 31.46 1" Socket 1192961 1.80
1-1/8 OC ** 14.0 1053128 53.73 1-1/8" Socket 1192989 2.05
* Minimum Ultimate Strength is 5 times the Working Load Limit
** ID Code "O" is old 319 style hook.
Wire Rope
Size
(in.)
S-319SWG
Stock No.
Dimensions
(in.)
B
D
E
F
G
H
J
K
L
M
O
P
R
Y
AA
3/16
1053002
.44
2.86
.20
.63
.73
.81
.93
.63
5.18
.63
.93
1.96
2.39
2.00
1.50
1/4
1053011
.50
3.15
.27
.69
.84
.94
.97
.71
5.72
.71
.97
2.22
2.63
2.88
2.00
5/16
1053020
.65
3.59
.34
.75
1.00
1.16
1.06
.88
6.39
.88
1.06
2.44
2.80
2.50
2.00
5/16
1053039
.77
3.99
.34
.81
1.14
1.31
1.19
.94
7.18
.94
1.16
2.78
3.21
2.75
2.00
3/8
1053048
.77
3.99
.41
.81
1.14
1.31
1.19
.94
7.18
.94
1.16
2.78
3.21
2.75
2.00
7/16
1053057
.98
4.84
.48
1.00
1.44
1.63
1.50
1.31
8.70
1.13
1.41
3.47
3.92
3.25
2.50
1/2
1053066
.98
4.84
.55
1.00
1.44
1.63
1.50
1.31
8.70
1.13
1.41
3.47
3.92
3.25
2.50
9/16
1053075
1.25
6.27
.61
1.25
1..82
2.06
1.78
1.66
10.51
1.44
1.69
4.59
4.86
3.75
3.00
5/8
1053084
1.25
6.27
.67
1.25
1.82
2.06
1.78
1.66
10.51
1.44
1.69
4.59
4.86
3.75
3.00
3/4
1053093
1.55
7.54
.80
1.50
2.26
2.63
2.41
1.88
12.63
1.63
2.22
5.25
6.00
4.25
4.00
7/8
1053100
1.70
8.33
.94
1.63
2.60
2.94
2.62
2.19
13.60
1.94
2.41
5.69
6.51
4.38
4.00
1
1053119
1.98
10.38
1.06
2.13
3.01
3.50
3.41
2.69
16.80
2.38
3.19
6.88
8.30
5.38
4.00
1-1/8
1053128
2.25
13.63
1.19
2.50
3.62
4.62
4.00
3.00
23.09
3.00
3.25
8.78
9.43
9.75
6.50