WITH CROSBY'S NEW SLING SAVER LINE OF HARDWARE, YOU WILL
GET THE FULL RATED STRENGTH OF THE SLING AND EXTEND ITS LIFE

Shackle Inspection
Crosby Shackle

Recommended Application Chart
Application
Use
Comments
Web Slings, connect to Pad Eye,
Eye Bolt, or Lifting Lug.
S-281 Sling Saver
Web Sling Shackle

Always
Insure
Rated
Working
Load
Limits are
greater
than the
load
placed on
the fitting.

Round Sling, connect to Pad Eye,
Eye Bolt, or Lifting Lug
S-253 or S-252 Sling Saver
Shackle
Connect two S-252 or S-253 Sling Saver shackles together S-256 Link Plate
To keep the load centered on the
Pin, thus keeping the sling positioned correctly in the shackle bow.
S-255 Spool
Web Slings or Round Slings
connecting to Master Links, Rings, or Crosby 320N Eye Hooks.
S-280 Sling Saver Web Connector with spool
Web Slings or Round Slings
connecting to Grade 8 Chain.
S-282 Sling Saver Chain Connector with spool
High Strength, High Capacity Round Slings WS-320A Web Sling Hook
Choking with Web Slings or Round Slings S-287 Sliding Choker Hook
Master Links or Master Link Assembly to be sewn into eye of Web Sling or attached utilizing web connector. Welded Master Link A-344 and Master Link Assembly A-347.
Web Sling being used to lift die blocks, or other equipment where standard Hoist Rings are used. HR-125 W
Connecting High Performance sling to master links or eye hooks. S-237
Crosby Sling Saver hardware meets the requirements for minimum stock diameter or thickness and effective contact
width shown in the recommended standard specification for synthetic Polyester Roundslings by the Web Sling
and Tie Down Association. WSTDA-RS1 (revised 2001).