Sheave and Hook Configurator
 Sheave and Hook Configurator
 

SEE APPLICATION AND WARNING INFORMATION
Para Español: www.thecrosbygroup.com On Pages 116-117
  • Hoist hooks incorporate markings forges into the product which address two (2) QUIC-CHECK features.
    • Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook up, which allows for a QUIC-CHECK measurement to determine if the throat opening has changed, thus indicating abuse or overload.
      • To check, use a measuring device (i.e. tape measure) to measure the distance between the marks.  The marks should align to either an inch or half-inch increment on the measuring device.  If the measurement does not meet this criteria, the hook should be inspected further for possible damage.
    • Angle Indicators -- Indicates the maximum included angle which is allow between two (2) sling legs in the hook.  These indicators also provide the opportunity to approximate other included angles between two sling legs.
  • Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.

Patented trademark indicates QUIC-CHECK product.

Hook I.D. Codes:  A - Alloy Steel,
B - Bronze High Strength,
C - Carbon Steel.
Working Load Limit
(t)*		 Hook ID
Code		  Shank Hooks
Stock No		 Shank
Length 		 Weight
Each
(lbs.)		 Rep. Latch Kits
Carbon Alloy Bronze Carbon
S-319CN
 		Alloy
S-319AN
 		Bronze
S-319-BN

S-4320 Stock No.

 PL Stock
No.

SS-4055
Stock No.
3/4 1 .5 D 1028505 1028701 1028900 Std. .50 1096325 - -
1  1.5 .6 F 1028514 1028710 1028909 Std. .75 1096374 - -
1-1/2 2 1 G  1028523 1028723 1028918 Std. 1.00 1096421 - -
2 3  1.4 H 1028532 1028732 1028927 Std. 1.82 1096468 - -
3 5 2 I 1028541 1028741 1028936 Std. 3.69 1096515 1092000 -
5 7 3.5  J 1028550 1028750 1028945 Std. 7.25 1096562 1092001 -
7-1/2 11 5 K 1028563 1028765 1028954 Std. 13.49 1096609 1092002 -
10  15 6.5 L 1028572  1028774 1028963 Std. 18.00 1096657 1092003 -
15 22 10 N 1028581 1028783 1028972 Std. 35.33 1096704 1092004 -
20 30 - O 1024386 1024803 - Std. 72.00 - 1093716 1090161
20 30 - O 1024402 1024821 - Long 85.50 - 1093716 1090161
25 37 - P 1024420 1024849 - Std. 134.00 - 1093717 1090189
25 37 - P 1024448 1024867 - Long 172.00 - 1093717 1090189
30 45 - S 1024466 1024885 - Std. 182.00 - 1093718 1090189
30 45 - S 1024484 1024901 - Long 214.00 - 1093718 1090189
40 60 - T 1024509 1024929 - Std. 268.00 - 1093719 1090205
40 60 - T 1024545 1024965 - Long 312.00 - 1093719 1090205
50 75 - U 1024563 1024983 - Std. 390.00 - 1093720 -
50 75 - U 1024581 1025009 - Long 426.00 - 1093720 -
- 100 - W - 1025027 - Std. 610.00 - 1093721 -
- 100 - W - 1025045 - Long 675.00 - 1093721 -
- 150 -  X - 1025063 - Std. 735.00 - 1093721 -
- 200 - Y - 1025081 - Std. 1020.00 - 1093723 -
- 300 - Z - 1025090 - Std. 1390.00 - 1093724 -
* NOTE: Proof load is 2 times Working Load Limit.
All carbon hooks designed with a 5/1 design factor.
All alloy hooks 1-22t designed with a 4.5/1 safety factor.
All alloy hooks 30t and larger designed with a 4/1 safety factor.
All bronze hooks designed with a 4/1 safety factor.
New 319N Style Hook.
See column "Y" on following page for actual length.