HOOK CONNECTORS
The 6 connector styles shown below make it possible for Crosby to furnish a Golden Gate Hook to fit almost any make or model of hoisting equipment including American Engineering Lo-Hed, ARO, Coffing, Electro Lift, Ingersoll-Rand, P & H, Robbins and Myers, Shepard Niles, CM, Shaw-Box, Wright, Yale & Towne.

CLOSED SWIVEL BAIL
For use where hoisting line or shackle can be inserted into the bail. 
Suitable for
infrequent,
non continuous
rotation under
load.
Hook sizes:
1 through 14

 

 

 

 

 

Style C - with self-closing gate.
Style A - with manual-closing gate.

SHANK-TYPE HOOK (Standard Length)  For use on existing load blocks, with standard shank length. 
Hook sizes:
2 through 14

 

 

 

 

 

 

 

Style D - with self-closing gate.
Style B - with manual-cling gate.

SHANK-TYPE HOOK (Long Length)  For use on existing load blocks requiring extra shank length.
Hook: sizes:
4 through 17

 

 

 

 

 

 

 

Style K - with self-closing gate.
Style I - with manual-closing gate.

UNIVERSAL TYPE
Open swivel bail for attachment to link chain.
Suitable for
infrequent,
non continuous
rotation under
load.
Hook sizes:
3, 4 and 5

 

 

 

 

 

 

Style E - with self-closing gate.
Style G - with manual-closing gate. 

LINK CHAIN NEST
With ball-bearing swivel; attaches to chain by an alloy pin.
Suitable for
frequent
rotation under
load.
Hook sizes:
4, 5 and 7

 

 

 

 

 

 

Style O - with self-closing gate.
Style P - with manual-closing gate.

ROLLER CHAIN NEST
Attachment with ball-bearing swivel and full-floating connector.
Suitable for
frequent
rotation under
load.
Hook sizes:
4, 5 and 6

 

 

 

 

 

 

Style S - with self-closing gate.
Style R - with manual-closing gate. 

Letter designations shown beneath each illustration above indicate BOTH connector style and gate type. Each connector
is available with either a self-closing or manual-closing gate.  (e.g.: A size 4 hook with a closed swivel bail connector and
self-closing gate is 4-C; with manual-closing gate, it is 4-A.)