• Forged Steel - Quenched and Tempered.  
  • Hot Dip galvanized.
  • Tapped with standard UNC class 2 threads after galvanizing.
  • Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements.  Importantly, Crosby products meet other critical performance requirements inluding fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
  • Also available in blank (as forged) item (S-4028) or, on request, with metric threading (M-4028).

G-400 Eye Nuts

Size
No.		 Stock
Size
(in.)
S		 G-400
Stock No.
Galv.		 Std.
Tap
Size		 Working Load Limit* (lbs.) Weight Each (lbs.)

Dimensions
(in.)
A C D E F J K N T W
1 .25 1090438 1/4 520 .09 1.25 .75 1.00 .75 .50 .69 .63 .46 1.72 .31
2 .31 1090474 3/8 1250 .17 1.62 1.00 1.20 .83 .56 .81 .89 .58 2.09 .41
3A .38 1090517 1/2 2250 .28 2.00 1.25 1.44 1.08 .81 1.00 1.09 .73 2.55 .50
4 .50 1090535 5/8 3600 .60 2.50 1.50 1.92 1.35 1.00 1.31 1.31 .83 3.25 .69
5 .63 1090553 3/4 5200 1.00 3.00 1.75 2.28 1.59 1.12 1.50 1.57 1.05 3.96 .84
6 .75 1090571 7/8 7200 1.65 3.50 2.00 2.50 1.96 1.38 1.88 1.77 1.14 4.40 1.00
7 .88 1090599 1 10000 2.69 4.00 2.25 2.92 2.21 1.56 2.13 2.02 1.30 5.10 1.19
8 1.00 1090633 1-1/4 15500 3.87 4.50 2.50 3.35 2.46 1.88 2.38 2.27 1.52 5.87 1.38
9 1.13 1090651 1-3/8 18500 5.00 5.00 2.75 4.00 2.69 2.00 2.56 2.53 1.67 6.51 1.50
10 1.25 1090679 1-1/2 22500 6.78 5.62 3.12 4.31 3.09 2.25 3.00 2.82 1.83 7.06 1.66
11 1.50 1090697 2 40000 14.60 7.12 4.10 6.00 4.09 3.13 3.75 3.68 2.49 10.13 1.94
*Ultimate Load is 5 times the Working Load Limit.  Rating based on standard tap size.
 

 
  • Forged Steel - Quenched and Tempered.
 

S-405 Lifting Eyes

Size
No.		 S-405
Stock No.		 Working Load Limit *
Threaded (lbs.)		 Maximum
Thread
Diam.
(in.)		 Weight Each
(lbs.)

Dimensions
(in.)
A C D E F H J K L N T W
1 1090269 850 .31 .10 1.25 .75 1.02 .66 .50 .34 .69 .67 .69 .42 2.46 .31
2 1090287 1250 .38 .20 1.62 1.00 1.20 .75 .56 .41 .81 .92 .94 .55 3.00 .41
3 1090303 2250 .50 .50 2.00 1.25 1.44 1.00 .81 .53 1.13 1.13 1.25 .68 3.69 .50
4 1090321 3600 .63 .79 2.50 1.50 1.92 1.19 1.00 .66 1.31 1.38 1.50 .80 4.59 .69
5 1090349 5200 .75 1.25 3.00 1.75 2.28 1.38 1.12 .78 1.50 1.66 1.75 .98 5.55 .84
6 1090367 7200 .88 2.25 3.50 2.00 2.50 1.63 1.38 .91 1.88 1.91 1.88 1.06 6.16 1.00
7 1090385 10000 1.00 3.25 4.00 2.25 2.92 1.88 1.56 1.03 2.13 2.16 2.06 1.20 7.07 1.19
8 1090401 12500 1.13 4.70 4.50 2.50 3.35 1.94 1.88 1.16 2.38 2.47 2.50 1.40 8.16 1.38
10 1090410 18000 1.50 9.33 5.62 3.12 3.81 2.75 2.25 1.53 3.00 2.98 3.21 1.69 9.96 1.66
* Ultimate Load is 5 times the Working Load Limit.  Rating based on UNC thread size shown in Max Thread Diameter column.
Dimension before machining (as forged).