Suitable for use with Grade 80 chain in overhead lifting applications
as long as hook is Proof Tested as part of the chain sling assembly or as an individual
component. Per ANSI B30.9-1.
Each hook has a Product Identification Code (PIC) for material traceability,
along with the size and Crosby & U.S.A. in raised letters.
Meets ASTM A-952-96 and proposed Euronorm standards for Grade 80
chain fittings.
Hoist hooks incorporate two types of strategically placed markings
forged into the product which address two (2) QUIC-CHECK features: Deformation Indicators
and Angle Indicators Can be proof tested to 2-1/2 times the Working Load Limit (4:1).
Working Load Limit for Wire Rope forged on raised lettering pad to
allow user to grind off quickly and easily without affecting hook.
Crosby recommends grinding the Working Load Limit (which is for a
5 to 1 Design Factor) off the hook when using with Grade 80 chain.
Low profile hook tip.
New integrated latch (S-4320) meets the World class standard for
lifting.
Heavy duty stamped latch interlocks with the hook tip.
High cycle, long life spring.
When secured with proper cotter pin through the hole in the tip of
hook, meets the intent of OSHA Rule 1926.550 (g) for personnel lifting.
Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
"Look for the color Gold - Crosby Alloy Products."
Crosby S-320AN Eye Hoist Hook
Featuring an Engineered Flat and Integrated Latch
