380 Series Easy Reeve® Hook Blocks

• Wide range of product available.

  Capacity: 5 to 80 tons - Larger Models Available. Sheave Sizes: 10" to 20". Wire Line Sizes:  7/16  to 1-1/4".

• All single point shank hooks are genuine Crosby®, forged alloy steel, Quenched and  Tempered, and have the patented QUIC-CHECK  markings (Duplex hooks are available on most sizes).
• Design Factor of 4 to 1 (unless otherwise noted).
• All Easy Reeve® Blocks are furnished standard with Roller Bearings.
• Reeving Guides Standard - All Models.
• Blocks thru 25 tons use 319N hooks with S-4320 latches.
• Heavy Duty  Positive Locking (PL) Latch - Models: 25 tons and larger.
• Sheave lubrication through center pin - Separate lube channel to each bearing.
• Sheaves fully protected by side plates.
• Dual action hook (Swings and Rotates).
• Repair parts available through world wide distribution network.
• All Easy Reeve® blocks, 16" and larger, are furnished with McKissick® Roll-Forged™ sheaves with flame hardened grooves.
• Manufactured by an  ISO 9001 and API Q1 certified facility.
• Look for the Orange Hook . . . the mark of genuine McKissick® quality.

• Duplex Hooks (75 tons & larger)
• Swivel Tee and Shackle Assemblies
• Sheave Shrouds
• Anti Rotation - Locking Device (75 tons & larger)
• Plate Steel Cheek Weights
• Third party testing with Certification
  available upon request.

Center "Dead End" to promote better block travel under various reeving configurations.

Sheave Guards that open
to allow block reeving without
removing the rope end fitting.