CROSBY S-1 INSPECTION REPORT						BY: DATE: SITE:
SWIVEL LOCATION EQUIPMENT, OR I.D.	BASIC INSPECTION (SEE CODE BELOW)	JAW	BODY	BOLT	BODY OF HOOK	CLEARANCE	OTHER POINTS DETERMINED BY USER BASED ON APPLICATION
BASIC INSPECTION CODE AA CRACKING OR IMPACT DAMAGE AB MODIFICATION SUCH AS WELDING OR CUTTING AC SUBSTITUTION OF PARTS AD RESTRICTED MOVEMENT OF THE SWIVEL AE EXCESSIVE WEAR AF EXCESSIVE CASE TO END FITTING CLEARANCE AG EXCESSIVE DEFORMATION					BASIC LUBRICATION REQUIREMENTS PRESSURE LUBRICATION FITTINGS ARE PROVIDED ON ALL SIZES.  USE A LITHIUM BASED GREASE OF MEDIUM CONSISTENCY.
					THE FREQUENCY OF LUBRICATION DEPENDS ON FREQUENCY AND PERIODS OF USE, ENVIRONMENTAL CONDITIONS, AND THE USER'S GOOD JUDGMENT
FOR CAPACITIES LESS THAN 10 TONS THERE ARE NO MACHINED SURFACES.  THE SWIVEL TO END FITTING CLEARANCES SHOULD BE CHECKED AND IF FOUND TO EXCEED .180", THE SWIVEL SHOULD BE REMOVED FROM SERVICE.  REPLACE SWIVEL DO NOT DISASSEMBLE.					AS A MINIMUM LUBRICATION SCHEDULE SHOULD INCLUDE: EVERY 14 DAYS FOR FREQUENT SWIVELING  EVERY 45 DAYS FOR INFREQUENT SWIVELING
FOR CAPACITIES 10 TONS AND LARGER THERE ARE MACHINED SURFACES.  THE SWIVEL TO END FITTING CLEARANCES SHOULD BE CHECKED AND IF FOUND TO EXCEED .125" TO .180", THE SWIVEL SHOULD BE REMOVED FROM SERVICE.					DISASSEMBLY AND INTERNAL MAINTENANCE OF 10 TON AND LARGER SWIVELS BY THE USER IS PERMITTED WHEN APPROPRIATE

(Sample Inspection Form #6)  The user must edit as needed.